|
Red Liquid Cement Color
Add (1) 10 oz. bottle with (2) 80 lb. or (2) 60 lb. bags of either concrete, mortar, or sand mix. (1) 10 oz. bottle will extend to 4 bags of stucco mix. Intensity of color will be increased by using additional color. 10 oz. bottle.
View Details
|
275387 |
Red Liquid Cement Color |
4 |
13.99 |
/ EA |
1317-03 |
|
|
Qt Concrete Crack Seal
A uniformly blended latex emulsion, specially designed to adhere to all concrete surfaces. Fill cracks in sidewalks, walkways, steps, patios, driveways, etc. No mixing is required, just pour directly from the bottle. Blends in with the natural gray color of concrete. Quart bottle.
View Details
|
267015 |
Qt Concrete Crack Seal |
5 |
13.99 |
/ EA |
8640-00 |
|
|
5.5oz Concrt Crack Seal
Ready-to-use, acrylic latex emulsion formula, specially designed for use on any concrete surface, including sidewalks, walkways, driveways, patios, and steps. Fills and seals cracks up to 1/2" (12mm) wide. Easy-to-apply, just squeeze directly from the tube. Self-leveling, blends in with the natural color of concrete. Dry to touch in 30 minutes, and hardens in 24 hours. Coverage: 12 linear ft. at 1/4" bead. 5.5 fl. oz. squeeze tube. Gray.
View Details
|
264136 |
5.5oz Concrt Crack Seal |
12 |
6.79 |
/ EA |
8640-15 |
|
|
Qt Concrt Patch Compound
Concrete patching compound is ready-to-use trowel applied textured acrylic for crack and small repairs. Repairs and fills surface imperfections and cracks up to 1/4" deep in concrete, masonry, stucco, patios, sidewalks, and driveways. Weather-resistant - helps prevent water and ice damage to concrete surfaces. Dries quick to a durable and flexible finish. Easy clean up with water before product dries. 1 quart covers approximately 3.25 sq. ft. at a 1/8" thickness.
View Details
|
260047 |
Qt Concrt Patch Compound |
5 |
9.99 |
/ EA |
8650-35 |
|
|
2.5gl Thset Mortar Admix
Acrylic mortar and grout additive. Increases tensile and bond strength, water-resistance and flexibility of thin set mortar and Portland cement grouts. Recommended for installing wall tile, ceramic, mosaic, paver, and quarry tile. Coverage: As an additive to custom thin set mortar, ratio is 1 quart liquid to 5 lb. thin set mortar powder. Can also be used with custom floor leveler for added strength. 2-1/2 gallon bottle.
View Details
|
285706 |
2.5gl Thset Mortar Admix |
2 |
42.99 |
/ EA |
AMA2 |
|
|
Gl Gry Pm Thinset Mortar
A no-mix, no-mess alternative to traditional thin-set mortars spreads quickly and easily. Recommended to bond porcelain, stone, marble, granite and ceramic or porcelain tile up to 8" x 8". Can be used with tile with one side up to 15", but dry time significantly increases. For interior wall and floor installations. Use white SimpleSet when installing lighter-color stone and tile. Exceeds ANSI A136.1 Type I. Coverage: 40-44 sq. ft. per gallon using a 3/16" x 5/32" V-notch trowel for tile up to 6" x 6". 20-25 sq. ft. per gallon using 1/4" x 1/4" x 1/4" square notch trowel for tile up to 12" x 12". 14-17 sq. ft. per gallon using a 1/4" x 3/8" x 1/4" square notch trowel for tile over up to 16" x 16".
View Details
|
261327 |
Gl Gry Pm Thinset Mortar |
2 |
32.99 |
/ EA |
CTTSG1-2 |
|
|
3.5g Gry Pm Thnst Mortar
A no-mix, no-mess alternative to traditional thin-set mortars spreads quickly and easily. Recommended to bond porcelain, stone, marble, granite and ceramic or porcelain tile up to 8" x 8". Can be used with tile with one side up to 15", but dry time significantly increases. For interior wall and floor installations. Use white SimpleSet when installing lighter-color stone and tile. Exceeds ANSI A136.1 Type I. Coverage: 40-44 sq. ft. per gallon using a 3/16" x 5/32" V-notch trowel for tile up to 6" x 6". 20-25 sq. ft. per gallon using 1/4" x 1/4" x 1/4" square notch trowel for tile up to 12" x 12". 14-17 sq. ft. per gallon using a 1/4" x 3/8" x 1/4" square notch trowel for tile over up to 16" x 16".
View Details
|
273546 |
3.5g Gry Pm Thnst Mortar |
3 |
59.99 |
/ EA |
CTTSG3 |
|
|
50lb Gry Multiset Mortar
Economical, polymer modified, thin-set mortar for floor, wall, and countertop tile installations. Use to bond vitreous, semi-vitreous, or absorptive tile: Ceramic, mosaic, quarry, cement, porcelain, brick and mini-brick, precast terrazzo, and natural stone to concrete, mortar beds, masonry, Portland cement plaster, wonderboard, cement backerboards, gypsum wallboard (dry areas), and existing ceramic tile. Meets ANSI (A118.11) with Thin-Set Mortar Admix; meets ANSI A118.4 without Thin-Set Mortar Admix. Do not bond directly to hardwood, luan plywood, particle board, parquet, cushion, or sponge-back vinyl flooring, metal fiberglass, plastick, and OSB panels. Approximate coverage: 80 - 90 sq. ft. per 50 lb. applied with a 1/4" x 1/4" x 1/4" square-notch trowel. Pot life: 2 hours. Allow to cure 24 hours before grouting or light traffic, depending on temperature and humidity. 50 lb. bag.
View Details
|
263818 |
50lb Gry Multiset Mortar |
2 |
19.99 |
/ BG |
MSMG50 |
|
|
50lb Wht Multiset Mortar
Economical, polymer modified, thin-set mortar for floor, wall, and countertop tile installations. Use to bond vitreous, semi-vitreous, or absorptive tile: Ceramic, mosaic, quarry, cement, porcelain, brick and mini-brick, precast terrazzo, and natural stone to concrete, mortar beds, masonry, Portland cement plaster, wonderboard, cement backerboards, gypsum wallboard (dry areas), and existing ceramic tile. Meets ANSI (A118.11) with Thin-Set Mortar Admix; meets ANSI A118.4 without Thin-Set Mortar Admix. Do not bond directly to hardwood, luan plywood, particle board, parquet, cushion, or sponge-back vinyl flooring, metal fiberglass, plastick, and OSB panels. Approximate coverage: 80 - 90 sq. ft. per 50 lb. applied with a 1/4" x 1/4" x 1/4" square-notch trowel. Pot life: 2 hours. Allow to cure 24 hours before grouting or light traffic, depending on temperature and humidity. 50 lb. bag.
View Details
|
265195 |
50lb Wht Multiset Mortar |
6 |
19.99 |
/ BG |
MSMW50 |
|
|
Versabond Gray Thin-set 50lb
VERSABOND GRAY THIN-SET 50LB
View Details
|
287512 |
Versabond Gray Thin-set 50lb |
4 |
24.99 |
/ BG |
MTSG50 |
|
|
Versabond White Thin-set 50lb
Polymer modified, Portland cement mortar system formulated to provide excellent adhesion to interior surfaces without the addition of a latex additive. Use to adhere glazed and unglazed ceramic mosaic, glazed wall tile, quarry, terrazzo, cement-bodied tile, high-lug tiles and pavers to properly prepared interior surfaces such as exterior grade plywood and many resilient flooring surfaces. It also offers increased bond strength when adhering to conventional thin set mortar substrates such as concrete, concrete block, wonderboard, gypsum drywall, and existing ceramic tile. Interior use only. Not recommended over cushion resilient flooring, hardwood or parquet flooring, particle board, wafer board, masonite, metal or plastic. Coverage is dependent upon substrate, tile, and size of notched trowel. Average coverage is approximately 2 sq. ft. per lb. Allow to cure 24 to 72 hours before grouting. Clean up immediately after use with water.
View Details
|
272911 |
Versabond White Thin-set 50lb |
8 |
23.99 |
/ BG |
MTSW50 |
|
|
 |
268776 |
7lb Platinum Sanded Grout |
4 |
16.99 |
/ BX |
PBPG1157-4 |
|
|
7lb Delorean Gray Sanded Grout
7LB DLRN GRY SND GROUT
View Details
|
269567 |
7lb Delorean Gray Sanded Grout |
4 |
16.99 |
/ BX |
PBPG1657-4 |
|
|
 |
271825 |
7lb Haystack Sanded Grout |
4 |
16.99 |
/ BX |
PBPG3807-4 |
|
|
7lb Bright White Sanded Grout
7LB BRT WHT SND GROUT
View Details
|
264125 |
7lb Bright White Sanded Grout |
2 |
16.99 |
/ BX |
PBPG3817-4 |
|
